VVDI–Prog V1.1 work well and available at obd2express.co.uk
Good news, VVDI-Prog V1.1 is tested working well, and is available at obdexpress.co.uk:
http://www.obdexpress.co.uk/wholesale/vvdi-prog-vvdi-prog-super-programmer.html
VVDI Prog Brief Introduction
1.1 Main Feature
1)The built-in update software allows user to update VVDIProg firmware timely.
2)High-speed USB communication interface enable the software automatically connect.
3)Smart operation mode: the possible causes of error will be listed
4)Reserve ports: for future update.
5)The self-test function enable you check if the machine works well.
6)Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
PCB board comparison: VVDI –Prog Vs Orange
VVDI -Prog Supported chip list on EEPROM, MCU and ECU
2.1 EEPROM
2.2 MCU
2.3 ECU
1.2 Parts List
1.3 Adapters Detailed Description
1.3.1 16pin locking socket
Read the common EEPROOM, note: please insert the chip by following the below picture.
1.3.2 MCU Reflash cable
Used to program MCU on board
1.3.3 ECU Reflash cable
Used to program ECU
1.3.4 MC9S12 Reflash cable
Used to program MC9S12 series chip
http://www.obdexpress.co.uk/wholesale/vvdi-prog-vvdi-prog-super-programmer.html
1.1 Main Feature
1)The built-in update software allows user to update VVDIProg firmware timely.
2)High-speed USB communication interface enable the software automatically connect.
3)Smart operation mode: the possible causes of error will be listed
4)Reserve ports: for future update.
5)The self-test function enable you check if the machine works well.
6)Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.
PCB board comparison: VVDI –Prog Vs Orange
2.1 EEPROM
2.2 MCU
2.3 ECU
1.2 Parts List
1.3 Adapters Detailed Description
1.3.1 16pin locking socket
Read the common EEPROOM, note: please insert the chip by following the below picture.
1.3.2 MCU Reflash cable
Used to program MCU on board
1.3.3 ECU Reflash cable
Used to program ECU
1.3.4 MC9S12 Reflash cable
Used to program MC9S12 series chip
Comments
Post a Comment