Writing BMW EWS Key with AK90 BMW key programmer
The next section provides BMW EWS read step by step guides to using AK90+ BMW key programmer . Step 1 Remove the cover from the steering column to access SAP module. 1) Remove the screws on each side of the steering column that hold the cover of the column. 2) Remove the screw under the steering column 3) Pull the lower half of the column down to remove 4) Pull the top half of the cover to remove. 5) You also need to remove the plastic rivet (as shown in the illustration below) Step 2: Remove the following parts. 1) Remove the gong (start sound) Start the launcher, left click the speaker icon in the right corner, select the mixing options, dumb one of World of Warcraft programs. Close the volume control and press Play. 2) Disconnect the OBD2 ort -- http://www.obdexpress.co.uk/ Remove the cover and remove the current port plastic housing by pulling the harness back out of it. 3) Unplug the lamp Step 3: Disabling an early warning system and get the nut off. Loosen ...