Free Download 8-in-1 Truck adblue emulator software

8-in-1 Truck Adblueobd Emulator for Mercedes-Benz, MAN, Scania, Iveco, DAF, Volvo, Renault and Ford software can be downloaded free here:
http://down.obdexpress.co.uk/adblue-sh42-db.zip

Truck model supported:
Mercedes, MAN, Scania, Iveco, DAF, Volvo, Renault and Ford

Truck engine system:
Euro 4 or Euro 6

Software Operating system:
Windows XP operating system

Software installation video guide:
https://www.youtube.com/watch?v=SmmF4B1MnOg
How to connect adblue emulator 8-in-1 with truck?
Check the Pinout cable in our QC Mark and connect the cables with vehicle follow the QC instructions:
Red-24(+15)
Brown- CANL
Grey-24(+20)
Black-GND (Han-Ground)
White-CANH

1)RED (+15). To be connected to a 24V source enabled when the engine key is in the ON position. This connection will supply power to the minusble Module when the engine key is on (dashboard on).
2)BLACK (GND 0V). To be connected to an earth/gound.
3)GREY (+20). To be connected to a 24V supply always available to the Existing adblue system (F4 protection fuse and the adblue system).
4)WHITE(CAN H). To be connected to CAN H of the system.
5)  BROWN (CAN L). To be connected to CAN L of the system. The connections must be made under the box of the connectors located under the protection cover of the radiator (passenger side). The conductor of the ground of the adblue has the number 0000, but it is possible to use another ground conductor found by a multimeter.

Comments

  1. Здравствуйте! Где можно скачать это ПО? ссылка не доступна

    ReplyDelete

Post a Comment

Popular posts from this blog

MPPS V16 ECU tuning software and car list free download

Free download Volvo VIDA DiCE 2014D and Win 7 installation

How to install ElsaWin 4.0 software for Audi/VW/Seat/Skoda