Solution for Hyundai ix35 indicator lights on driver’s side all time is on
This post starts with the problem that Hyundai ix35 indicator lights on driver’s side all time is on, then the advised solution is followed in the following parts. Car model and year: hyundai ix35 tucson 2011 year,2.0i gasoline,manual transmission Problem: I have problem with indicator lights on drivers side(rear and on drivers mirror),all time is on .When lock vehicle,that two indicators stay enabled and can't turn off. Hyundai diagnostic tool I use: GDS VCI Diagnostic Tool for Kia & Hyundai V15 from http://www.obdexpress.co.uk/wholesale/gds-vci-diagnostic-tool-for-kia-hyundai.html Got wiring diagram to follow: By following this picture, I tried to do: To this box on connector i/p F,on pin number 4,comes white wire with constant 12 volt supply.When i cut this wire,left rear and left mirror flasher turn off.Can you please check from where comes that wire,from what module?On photos that you posted i see that from bcm comes only can bus wires,not voltage wires...