Quickly 4C 4D 46 48 clone machine only $249
One newest car key chip clone machine released, named quickly 4C 4D 46 48 clone machine, which is similar as ND900 and CN900, but much cheaper only $249.
Quickly 4C 4D 46 48 clone machine can work with:
1.Support copy 4C, 4D chip (TPX1, TPX2, EH2, TK40...)
1)Can work with CN1 chip, and can copy 4C.
CN1 chip: http://www.obdexpress.co.uk/wholesale/cn1-copy-4c-chip-10pcs-lot.html
2)Can work with CN2 chip, and can copy 4D chip.
CN2 chip: http://www.obdexpress.co.uk/wholesale/cn2-copy-4d-chip-10pcs-lot.html
3)Can work with YS-01 Chip, and can copy 4C.
YS-01 chip:
http://www.obdexpress.co.uk/wholesale/ys-01-chip-for-nd900-cn900-10pcs-lot-2027.html
2.To do ID46 and 4D chip, need additional ID46 and 4D decoder box.
ID46 decoder box:
http://www.obdexpress.co.uk/wholesale/id46-decoder-box-id-46-copy-box-nd900-key-programmer.html
To copy 4D chip, need additional 4D decoder box, CN900 4D decoder and ND900 4D decoder, both are okay.
http://www.obdexpress.co.uk/wholesale/cn900-4d-decoder-obd2express.html
or http://www.obdexpress.co.uk/wholesale/nd900-4d-decoder-2564.html
3.Can recognize locked ID48 and can unlock ID48.
Simple guide on how to use quickly 4C 4D 46 48 clone machine
1.The external interface as show in following picture:
2.Identify the chip
Put the chip into the chip read area and click "chip reading and writing". If there is a chip, the corresponding chip and parameter will be displayed, as show in following picture:
3.Copy the chip
For example: copy the chip 42. Firstly, put the key that can start the original car into the chip reader area to read data, as show in following picture. Then decoder, remove the key of original car, put into the new chip 42, click "copy", as show in next picture---OK!
4.Additional settings
For example: in order to generate the chip 4D67, we first put a blank chip 4D60 into the chip reader area and then click "additional settings"--"key cutting", as show in Fig.(6)---click 67, as show in Fig(7)---generate data---done, as show in Fig.(8)
5. Identify whether Toyota smart key has been used or not
For example: put Toyota smart key into the chip read area and click "additional settings"--- reading of "smart key", it will show you it is new or used.
6. Detect the frequency
Put the key of the remote controller into the frequency detection area in a flat manner, and click "frequency detection" in the menu; then, press any key of the remote controller, and corresponding frequency, ID, modulation mode, speed and other parameters are then show on the screen.
Quickly 4C 4D 46 48 clone machine can work with:
1.Support copy 4C, 4D chip (TPX1, TPX2, EH2, TK40...)
1)Can work with CN1 chip, and can copy 4C.
CN1 chip: http://www.obdexpress.co.uk/wholesale/cn1-copy-4c-chip-10pcs-lot.html
2)Can work with CN2 chip, and can copy 4D chip.
CN2 chip: http://www.obdexpress.co.uk/wholesale/cn2-copy-4d-chip-10pcs-lot.html
3)Can work with YS-01 Chip, and can copy 4C.
YS-01 chip:
http://www.obdexpress.co.uk/wholesale/ys-01-chip-for-nd900-cn900-10pcs-lot-2027.html
2.To do ID46 and 4D chip, need additional ID46 and 4D decoder box.
ID46 decoder box:
http://www.obdexpress.co.uk/wholesale/id46-decoder-box-id-46-copy-box-nd900-key-programmer.html
To copy 4D chip, need additional 4D decoder box, CN900 4D decoder and ND900 4D decoder, both are okay.
http://www.obdexpress.co.uk/wholesale/cn900-4d-decoder-obd2express.html
or http://www.obdexpress.co.uk/wholesale/nd900-4d-decoder-2564.html
3.Can recognize locked ID48 and can unlock ID48.
Simple guide on how to use quickly 4C 4D 46 48 clone machine
1.The external interface as show in following picture:
Put the chip into the chip read area and click "chip reading and writing". If there is a chip, the corresponding chip and parameter will be displayed, as show in following picture:
For example: copy the chip 42. Firstly, put the key that can start the original car into the chip reader area to read data, as show in following picture. Then decoder, remove the key of original car, put into the new chip 42, click "copy", as show in next picture---OK!
For example: in order to generate the chip 4D67, we first put a blank chip 4D60 into the chip reader area and then click "additional settings"--"key cutting", as show in Fig.(6)---click 67, as show in Fig(7)---generate data---done, as show in Fig.(8)
For example: put Toyota smart key into the chip read area and click "additional settings"--- reading of "smart key", it will show you it is new or used.
6. Detect the frequency
Put the key of the remote controller into the frequency detection area in a flat manner, and click "frequency detection" in the menu; then, press any key of the remote controller, and corresponding frequency, ID, modulation mode, speed and other parameters are then show on the screen.
Comments
Post a Comment