FAQ Mercedes Benz AK500+ Key Programmer
AK500+ Key Programmer for Mercedes Benz with EIS SKC Calculator, can read data more quickly and safely, can read and write keys more quicky.
FQA about the new released AK500+ Key Programmer for Mercedes Benz:
Q: Can AK500+ read and write the key of Motorolla and NEC?
A: AK500+ only can write the key of NEC. If your EIS is NEC's, we have no tool for it?
Q: How to use AK500+ to make the lost old key unavailable?
A: AK500+ auto Key Programmer doesn't have this function.
Q: Is the SKC version of AK500+ SKC V1011?
A: Yes, it's V1011.
Q: Is the SKC of AK500+ with software and hardware?
A: Yes, it's with software and hardware.
Q: Can the used mb key be available again? How to clear the old key's data?
A: If the old key is readable, then it can be used again. But if you want to use the ole key again, the key chip should be taken part first and choose the renew key in the software.
Procedures of using the new released AK500+ Key Programmer:
1. Withdraw EIS and read out the EIS data to save according to wiring diagram;
2. Calculate 8 keys data from the EIS data by SKC;
3. Writing the key data in the Mercedes Benz keys for the demanding number
Q: I cannot find adapter 95*****. Because there is no adapter 95***** for connecting the port of adapter 95 in AK500, I cannot red the ECU and ESM data. In the video, someone uses a adapter to connect AK500. The man says it is in the box although he can't find it and thinks a chip adapter is a must.
A: T here is no adapter 95 in AK500+ SKC. No need to dissemble ECU because the existence of SKC. adapter 95 only can be found in AK500. Using AK500+ SKC with is more convenient than AK500 with adapter 95.
Q: How to dissemble EIS from the car? How to connect AK500+ by wire and EIS? And how to read and save EIS data?
A: If so, you must master the techniques of soldering wire. Open the installed software, choose the type of the car and mcu, you will get the diagram of soldering wire. Read the data and you can choose to save from the menu.
http://www.mbstartool.com
FQA about the new released AK500+ Key Programmer for Mercedes Benz:
Q: Can AK500+ read and write the key of Motorolla and NEC?
A: AK500+ only can write the key of NEC. If your EIS is NEC's, we have no tool for it?
Q: How to use AK500+ to make the lost old key unavailable?
A: AK500+ auto Key Programmer doesn't have this function.
Q: Is the SKC version of AK500+ SKC V1011?
A: Yes, it's V1011.
Q: Is the SKC of AK500+ with software and hardware?
A: Yes, it's with software and hardware.
Q: Can the used mb key be available again? How to clear the old key's data?
A: If the old key is readable, then it can be used again. But if you want to use the ole key again, the key chip should be taken part first and choose the renew key in the software.
Procedures of using the new released AK500+ Key Programmer:
1. Withdraw EIS and read out the EIS data to save according to wiring diagram;
2. Calculate 8 keys data from the EIS data by SKC;
3. Writing the key data in the Mercedes Benz keys for the demanding number
Q: I cannot find adapter 95*****. Because there is no adapter 95***** for connecting the port of adapter 95 in AK500, I cannot red the ECU and ESM data. In the video, someone uses a adapter to connect AK500. The man says it is in the box although he can't find it and thinks a chip adapter is a must.
A: T here is no adapter 95 in AK500+ SKC. No need to dissemble ECU because the existence of SKC. adapter 95 only can be found in AK500. Using AK500+ SKC with is more convenient than AK500 with adapter 95.
Q: How to dissemble EIS from the car? How to connect AK500+ by wire and EIS? And how to read and save EIS data?
A: If so, you must master the techniques of soldering wire. Open the installed software, choose the type of the car and mcu, you will get the diagram of soldering wire. Read the data and you can choose to save from the menu.
http://www.mbstartool.com
Comments
Post a Comment