Corolla 2012 G type add key

Question:
I did many Corolla G type before and always success to add a key on corolla 2011-2012 and it allways gscan asked for any working key, but now i get error "not a master key".

Optional solution one:
Add key no need immobox if u have Toyota Techstream, try using Techstream is better than x100.
Techstream can't reset immo.

When you get error "not a master key", try to read pg1 and see.
You need master key, you can check it by insert key in switch ,if immo light goes immediately its master , if not its valid and need to get immo out.

Optional solution two:
I have done many of these Toyota G keys when all key lost, you need to remove the whole dash to retrieve the Immo box which has 93C66 , writing Master G key by Tango key programmer to start car. You can add key only when you have master key. I was told that in USA you can reset the Immo using MVP Key Programmer, but it is only for USA.

Comments

Popular posts from this blog

MPPS V16 ECU tuning software and car list free download

Free download Volvo VIDA DiCE 2014D and Win 7 installation

How to install ElsaWin 4.0 software for Audi/VW/Seat/Skoda