Toyota is lost and the best way to make the new key
Description
When you lost all the keys of the toyota, what will you do? Right here will be the way to teach you to utilize Toyota 4D-G programmer to produce new keys if you lost all keys.
1. When you use Toyota 4D-G to create keys, you don't have to have to install any application. This tool is protected and stable. With it, when you lost all of the toyota keys, you can quickly to add 1-3 keys.
Try and use the ordinary car key programmer to read 93C66 data and save it, then use the following approach to make the key:
1) Take away the ECU safety box, [obdexpress.co.uk] and set up 93C66 Memory chips towards the pedestal of toyota 4D-G programmer.
2) Connect the USB cable with personal computer. Indicator light might be on, and flash for slow. Press the switch for 1 time, then indicator light will flash speedily. Immediately after about 10 seconds, indicator light are going to be off. Then operation will be succeed. obdexpress.co.uk
3) Set up 93C66 chip back to ECU safety box. Install it around the vehicle and plug inside the first key. Pull out the key after the anti-theft light is off. Then plug in to the second key, after the anti-theft light is off again, you are able to get started the key right away. Completely don't require to operate it at the same time, pretty simple to use.
2. How to use Toyota 4D-G programmer to match keys manually. obdexpress.co.uk?
When you've got the main key (Black plastic deal with), you are able to add the keys manually. secondary key (Grey plastic handle) can not be add keys manually.
Right here would be the detailed way:
Plug in and out from the electric switch for five occasions. Do not will need to open the electric switch. Just leave the key in the ignition lock. Open and close the driver door for six occasions. Pull out the major key, and plug in the new key with Toyota 4D-G programmer and wait for about 1 minute. [obdexpress.co.uk] Right after security lights goes out, then new key is matched successfully.
If the light is on once again, it is possible to match the key again. Focus: For this time, time for pull out/plug within the key and open/close the driver door is 1 second.
When you lost all the keys of the toyota, what will you do? Right here will be the way to teach you to utilize Toyota 4D-G programmer to produce new keys if you lost all keys.
1. When you use Toyota 4D-G to create keys, you don't have to have to install any application. This tool is protected and stable. With it, when you lost all of the toyota keys, you can quickly to add 1-3 keys.
Try and use the ordinary car key programmer to read 93C66 data and save it, then use the following approach to make the key:
1) Take away the ECU safety box, [obdexpress.co.uk] and set up 93C66 Memory chips towards the pedestal of toyota 4D-G programmer.
2) Connect the USB cable with personal computer. Indicator light might be on, and flash for slow. Press the switch for 1 time, then indicator light will flash speedily. Immediately after about 10 seconds, indicator light are going to be off. Then operation will be succeed. obdexpress.co.uk
3) Set up 93C66 chip back to ECU safety box. Install it around the vehicle and plug inside the first key. Pull out the key after the anti-theft light is off. Then plug in to the second key, after the anti-theft light is off again, you are able to get started the key right away. Completely don't require to operate it at the same time, pretty simple to use.
2. How to use Toyota 4D-G programmer to match keys manually. obdexpress.co.uk?
When you've got the main key (Black plastic deal with), you are able to add the keys manually. secondary key (Grey plastic handle) can not be add keys manually.
Right here would be the detailed way:
Plug in and out from the electric switch for five occasions. Do not will need to open the electric switch. Just leave the key in the ignition lock. Open and close the driver door for six occasions. Pull out the major key, and plug in the new key with Toyota 4D-G programmer and wait for about 1 minute. [obdexpress.co.uk] Right after security lights goes out, then new key is matched successfully.
If the light is on once again, it is possible to match the key again. Focus: For this time, time for pull out/plug within the key and open/close the driver door is 1 second.
Comments
Post a Comment