How to Read and Clear Codes with DS7058

Maxidas DS708 diagnostic trouble codes function allow you to read and clear diagnostic trouble codes(DTCs) from a vehicle.
Autel Maxidas ds708 function
DS708 read codes procedure varies for each vehicle being tested. This section includes the following read codes procedures:

To read DTCS with autel maxidas ds708, do follow steps:

NOTE: Read Codes can be performed with both KOEO (Key On Engine Off) and KOER (Key On Engine Run).
Autel Maxidas ds708 read codes
1. With the Function Menu screen displayed, click on Read Codes. This displays the Read Codes menu screen.
2. Click on one of the options that may appear on the Read Codes screen.
    Save - saves the code results for later review.
    Print - prints the code results.
3. When finished viewing the list, click on the Esc button to return to previous screens.

Autel Maxidas Ds708 After reading and / or reviewing the diagnostic trouble codes, use the following steps to erase the codes from the vehicle. If Erase Codes is not an available menu option, consult the manufacturer's service manual for the correct "clear code" method.

NOTE: This Erase Codes function clears the DTCs from the selected ECU or provides instructions for how to manually clear the codes from the ECU.

NOTE: Before performing this procedure, make sure the vehicle's ignition key is in the On (Run) position with the engine off.

Use DS708 Erase DTCs, please follow these steps:
1. With the Function Menu screen displayed, click on Erase Codes. This displays an instruction screen.
2. Follow the instructions on each screen that appears until the procedure is complete.
3. When finished, use the Esc button to return to previous screens.
4. Check the codes again. If any codes remain, repeat the Erase Codes steps.
http://www.findobd2.com

Comments

Popular posts from this blog

MPPS V16 ECU tuning software and car list free download

Free download Volvo VIDA DiCE 2014D and Win 7 installation

How to install ElsaWin 4.0 software for Audi/VW/Seat/Skoda