The way to Reset an Airbag's Warning Light

Usually the sole time the airbag's warning light turns on is when there has been an accident as well as the airbag has deployed. But in some cases the airbag light, also called the Supplemental Restraint Procedure (SRS) light, goes on as the On-Board Diagnostics personal computer receives a problems code from a sensor in the SRS. This is certainly to alert you of the malfunction inside the airbag method. In both situation, you have to have the airbag technique replaced in advance of you reset the airbag's warning light. When you do that, it is actually an easy fix taking only a handful of moments of the time, and it's important that know a lot more car obd2 tool.

1 Find the fuse panel cover from the foot effectively to the driver's side from the vehicle. Pull down on it to open it.
2 Find a yellow connector inside the fuse panel. Pull out this connector. This is actually the airbag electrical power connector, also known as the SRS power connector.
3 Insert a single finish on the paperclip into one particular terminal from the SRS energy connector and insert the other finish on the paperclip into the other terminal.
4 Put the important thing into the ignition and flip around the vehicle, producing confident you don't commence the engine. The paperclip shorts out the SRS light, consequently resetting and turning it off. Plug the SRS electrical power connector back in to the fuse panel. Put the cover back about the fuse panel and shut off the vehicle.
5 Wait several minutes, then turn the engine on. Seem to the instrument panel to make sure the SRS light has turned off. Flip off the engine and get rid of the keys from the automobile.
Share from ehow, Additional ABS/SBC TOOL at http://www.obd2express.co.uk